How ICT concepts apply to gold: the short answer
To trade gold (XAU/USD) with ICT concepts, you follow the same sequence used on a forex major. Read the daily bias, mark the liquidity resting above and below price, and wait for a kill zone to sweep one side. Then require a displacement that shifts structure, and look for an entry on the retrace into the fair value gap or order block that the displacement left behind. The stop goes beyond the sweep wick and the target is the liquidity on the opposite side.
What changes on gold is the proportions, not the logic. Gold's wicks run deeper, its reaction to US data is sharper, and the dollar distance between a sensible entry and a sensible stop is larger than most traders expect when they come from EUR/USD. The steps below take those differences into account, including the days when the setup should be skipped.
What makes XAU/USD different from a forex major
- It is priced in dollars and driven by US events. Anything that moves the dollar or US interest-rate expectations moves gold: inflation releases, employment reports, central bank decisions. Gold often moves opposite to the dollar, but that relationship loosens for days or weeks at a time, so treat it as context and not as a rule.
- Sweeps go further. A stop hunt on gold tends to run past the obvious level by more than a trader used to major pairs allows for. A stop tucked just under the Asian low is the liquidity being hunted, not protection from the hunt.
- Round numbers are liquidity. Stops and pending orders cluster at round-dollar prices, so those prices act as liquidity pools alongside session highs and lows.
- Asia is not always quiet. Gold has active participants during Asian hours, and some days the Asian session trends instead of building a range. On those days the Asian-range model described below has nothing to work with.
- It closes. Unlike crypto, gold has a daily break and a weekend, so opening gaps exist and a position held through them carries gap risk.
- Contract terms vary by broker. Spread, contract size and even what a "pip" means on gold differ from one broker to the next. Think in dollars per ounce and check what a one-dollar move is worth on your account before sizing anything.
Step 1: Set the daily bias and the draw on liquidity
Bias is the direction you are willing to trade today. A simple rule you can check on any chart: if the last closed daily candle closed above the high of the candle before it, the bias for the next candle is bullish. If it closed below the prior candle's low, the bias is bearish. A close inside the prior range gives no bias, and that is a valid reason to stand aside. The article on the daily bias rule and how to read it before the session covers this in more depth.
Bias alone is not enough. You also need a target, which ICT calls the draw on liquidity: the pool of resting orders price is most likely reaching for. On gold the usual candidates are the previous day's high or low, the previous week's high or low, and a cluster of equal highs or equal lows on the 1H or 4H chart. If price has already taken the obvious draw before your session starts, the day's main move may be behind you.
Step 2: Mark the liquidity gold tends to take first
Before London opens, draw these levels on a 1H chart:
- The high and low of the Asian session. The guide to marking the ICT Asian range explains which hours to use.
- The previous day's high and low.
- Any equal highs or equal lows, meaning two or more swing points at nearly the same price.
- The nearest round-dollar prices above and below.
Stops sit beyond each of these. Above the highs is buy-side liquidity (buy stops from shorts and breakout buyers). Below the lows is sell-side liquidity. With a bullish bias, the level that matters most is the one below price, because the cleanest long setups begin with a run on sell-side liquidity against the bias. With a bearish bias, the mirror applies.
Step 3: Wait for the sweep inside a kill zone
A kill zone is a time window when a major session's volume arrives and stop runs are most likely. For gold the two that matter most are the London kill zone, 02:00–05:00 New York time, and the New York kill zone, 07:00–10:00 New York time. The guide to kill zone session times and what to expect in each has the full schedule.
A sweep is a candle that trades through a marked level and then closes back on the original side. The close is the whole point. If a candle closes beyond the level and the next one continues, you are looking at a breakout, and fading it is trading against the move. Gold makes this distinction harder than most markets because its wicks are long, so wait for the candle to finish before deciding which one you have. The piece on telling a liquidity sweep from a breakout walks through the cases.
Step 4: Require displacement and a structure shift, then find the entry zone
A sweep on its own tells you stops were taken. It does not tell you anyone used that liquidity to reverse price. For that you need three things in order.
- Displacement. One or more large-bodied candles leave the swept level with little overlap between them.
- CISD. A Change in State of Delivery happens when a candle closes back beyond the level where the last run of candles into the swept low (or high) began. It is the earliest structural sign that delivery has flipped. See the CISD entry model for the trigger rules.
- An entry zone left behind. This is usually a fair value gap, a three-candle formation where the wicks of the first and third candles do not overlap. It can also be the order block, the last opposite-direction candle before the displacement. Some traders use the halfway point between the CISD level and the swept extreme as well.
An example in words
The numbers here are invented for illustration. Gold spends Asia between 2,640 and 2,652. The previous day's low is 2,636, and yesterday's daily candle closed above the high of the day before, so the bias is bullish. The previous day's high is the draw.
In the London kill zone a 15-minute candle drops to 2,634, taking both the Asian low and yesterday's low, and closes at 2,641, back inside the range. The next two candles push up hard and one closes above 2,645, the price where the final run of down candles into the low started. That close is the CISD. The push leaves a fair value gap between 2,642 and 2,644.
The long idea is now defined. It is a retrace into that gap with the invalidation below 2,634, the Asian high at 2,652 as the first target and the previous day's high beyond it. If price never retraces, there is no entry. If a candle closes below 2,634, the idea is wrong.
Step 5: Stop, target and position size on gold
The stop belongs beyond the wick that swept the liquidity, with some room, because gold tends to probe that wick again. A stop placed inside the fair value gap or at the order block's edge is tighter and gets hit more easily on an instrument that moves this far.
A wider stop does not have to mean more risk. Decide the amount you are willing to lose on the trade first, measure the dollar distance from entry to stop, and let those two numbers set the size. On gold that calculation usually produces a smaller position than the same setup on a major pair, and that is the correct result. The guide to the position size calculator shows the arithmetic.
Targets are liquidity, not round reward multiples. The first is usually the opposite side of the Asian range and the second is the daily draw. If the first target is closer than your stop distance, the setup offers less than it risks and can be passed.
| Step | What you need to see on XAU/USD | What cancels the idea |
|---|---|---|
| Bias | Last daily candle closed beyond the prior candle's high or low | Daily close inside the prior range |
| Draw | An untaken high or low in the bias direction | The draw was already taken before the session |
| Liquidity | A clear Asian range or previous-day level against the bias | Asia trended and left no range |
| Sweep | A kill zone candle trades through the level and closes back inside | The candle closes beyond the level and price continues |
| Confirmation | Displacement, a CISD close and a fair value gap or order block | A slow drift back with no displacement |
| Entry | A retrace into the gap or block | No retrace, or a close beyond the sweep wick |
When the gold setup fails
- Scheduled news inside the window. Around major US releases gold can sweep both sides of a range within minutes. The first sweep looks like a textbook setup and the second removes it. The article on discipline around high-impact events explains why many traders wait for the post-release structure.
- The second sweep. Price confirms with a CISD, retraces into the gap, then returns to take out the sweep wick before moving in the original direction. This is the most common way a correct read still loses on gold. A fresh entry needs a fresh confirmation.
- Trend days. When the higher timeframe is pushing hard, the "sweep" of a session level is simply continuation. A bias read from one daily candle will sometimes be wrong.
- No displacement. If price crawls back into the range without an imbalance, nothing has confirmed. A sweep without displacement is not a setup.
The model also cannot tell you how far price will travel. It gives you a location, a trigger and an invalidation. It gives you no information about the size of the move that follows.
How to find gold setups on LiquidityScan
Gold sits in LiquidityScan's Forex mode, which scans 72 instruments including five metals: XAU/USD, XAG/USD, XAU/EUR, XAG/EUR and XPD/USD. All 15 scanners run in that mode, and every detection comes from a closed candle, never from one still forming. The starting point is the All Scanners page in Forex mode, which shows all 15 with live counts. Each card there explains how its pattern works. Pages inside the app need a free account.
The steps in this article map onto the scanners like this:
- Bias fires when the previous close breaks beyond the candle before it, which is the rule from Step 1.
- CRT (Candle Range Theory) flags a sweep of a range high or low followed by a close back inside.
- CISD and CISD + IFVG flag the delivery shift from Step 4. The second requires that the shift also reclaims an inverse fair value gap.
- Asia Range Sweep flags an Asian-range sweep plus reversal aligned to a daily bias. Liquidity Sweep, Order Blocks and Fair Value Gaps cover the remaining pieces.
The first four are part of the eight classic scanners, which are free to read. The scanners in the last bullet belong to the premium seven. On the Free plan those show a live count, not the setups. Starter opens all 15 to browse, and alerts on the premium scanners belong to Base and above.
Most scanners work on 1H, 4H and 1D. Only Fair Value Gaps and CISD+ also have 5m and 15m, and those two timeframes belong to the Base plan and above. In practice the scanners tell you which higher-timeframe conditions are in place on XAU/USD, and the 15-minute refinement from the example is done on your own chart.
LiquidityScan is software and education, not a signal service. A detection is context for your own decision and never an instruction to buy or sell. For a wider look at the forex and metals coverage, see the guide to the forex order block and FVG scanner.
Frequently Asked Questions
What is the best time to trade gold with ICT concepts?
The London kill zone (02:00–05:00 New York time) and the New York kill zone (07:00–10:00 New York time) are the windows where session liquidity is most often swept. Outside them the same patterns appear, but with less participation behind the move.
Does ICT work on XAU/USD?
The concepts describe gold's behaviour well: it has session highs and lows, stops rest beyond them, and those stops get run. That does not make any single setup reliable. Individual trades still fail, most often around news and on the second sweep, which is why the invalidation level and position size matter as much as the entry.
Which timeframes should I use for gold?
A common split is the daily chart for bias and the draw on liquidity, the 1H or 4H for marking session and previous-day levels, and the 15-minute or 5-minute for the sweep, the CISD and the entry zone. Going lower adds noise faster than it adds precision on an instrument with wicks this long.
Where should the stop go on a gold ICT setup?
Beyond the wick that swept the liquidity, with some room. That wick is the point where the idea is proven wrong. Because the distance is larger on gold than on a major pair, reduce the position size to keep the amount at risk the same.
Why does gold sweep both sides of the range on news days?
Stops sit above the high and below the low at the same time. A fast, thin market around a release can reach both before direction settles. It is a liquidity event more than a directional one, and the Asian-range model is at its weakest then.
Is gold available on LiquidityScan?
Yes. XAU/USD is one of five metals in Forex mode, and all 15 scanners run on it. The eight classic scanners are free to read with an account.
Related reading
- ICT Forex Strategy: A Session-by-Session Playbook — the full trading day laid out by session, which gives the gold model its timing.
- How to Trade EUR/USD With ICT Concepts — the same sequence on a major pair, useful for seeing what is specific to gold.
- Liquidity Sweep Then Structure Shift: The Stop-Hunt-to-Reversal Sequence — a closer look at the two events that make up Steps 3 and 4.
- Best Forex Pairs for ICT Traders: Majors, Crosses and Why Exotics Behave Differently — how to choose what to trade alongside gold.



