LiquidityScan

· ENTRY MODELS & TIMING · 12 MIN READ · UPDATED TODAY

How to Trade GBP/USD With ICT Concepts: The London Session Playbook

How to Trade GBP/USD With ICT Concepts: The London Session Playbook

GBP/USD does most of its ICT work around the London open: Asia builds a range, London raids one side of it, and the real move follows. This guide walks through bias, sweep, confirmation, entry and invalidation, and shows where the model breaks down.

The short answer: GBP/USD is traded around the London open

To trade GBP/USD with ICT concepts, decide the daily bias first, mark the high and low of the Asian session, then wait for the London open to raid one side of that range. If the raid runs against your bias and price closes back inside the range with a clear shift in direction, the entry zone is the fair value gap or order block the reversal leaves behind. The stop goes beyond the sweep, the target is the liquidity on the opposite side, and New York either extends the move or reverses it.

Everything below is the detail that makes that usable: which candle counts, which level matters, and what tells you the idea is dead. None of it is a recommendation to trade the pair. It is a way to read it.

Why GBP/USD is a London-session pair

Sterling's home market is London. Most UK data is released in the London morning, UK banks and funds are active, and the pair (traders call it cable) usually leaves its overnight range in those hours. The dollar side arrives later with the New York morning, which gives GBP/USD a second window of activity while London is still open.

ICT (Michael J. Huddleston) describes the trading day as accumulation, manipulation and distribution. On GBP/USD the mapping is often easy to see: Asia accumulates in a range, London manipulates with a false move through one edge of it, and the real move of the day is distributed afterwards. Two things follow from that.

  • The Asian range is the reference. For sterling, Asia is normally the quiet part of the day, so its high and low tend to be clean levels with stops resting just beyond them: buy stops above the high (buy-side liquidity) and sell stops below the low (sell-side liquidity).
  • Cable's wicks need room. Traders who come from trading EUR/USD with the same concepts often find that GBP/USD pushes further through a level before it turns. Treat that as character, not a statistic. A stop sitting one pip under the Asian low is part of the liquidity, not protection from it.

Step 1: Set the daily bias before London opens

Bias is your read on which side of the previous day's range price is more likely to reach for today. A mechanical version: if yesterday's daily candle closed above the high of the day before, the bias is up. If it closed below the low of the day before, the bias is down. If it closed inside that range, there is no clean bias and your standards for a setup should go up. The daily bias scanner guide covers that rule in full.

Then name the draw on liquidity, the obvious pool of stops in the direction of the bias: the previous day's high, a set of equal highs on the 4H chart, last week's high. That level is the target. The bias also tells you which side of the Asian range is the trap. With a bullish bias, you want London to take the Asian low. With a bearish bias, the Asian high.

Step 2: Mark the Asian range

Draw the highest high and lowest low of the Asian session. Traders disagree on the exact hours. The Asia kill zone (a kill zone is a window when a session's volume arrives) runs 20:00–00:00 New York time, and many traders extend the box until London opens. Pick one definition and keep it, because a range that changes shape every day cannot be reviewed later. The guide to marking the ICT Asian range compares the conventions.

Before London, check two things. First, is the range balanced, with price rotating between a clear high and low, or did Asia already trend in one direction? A one-way Asian session leaves no tidy range to raid, and the London model is weaker. Second, are there equal lows or equal highs at the edge? Two or three touches at the same price mean more stops sit beyond it.

Step 3: Wait for the London sweep and the close back inside

The London kill zone runs 02:00–05:00 New York time. The kill zone times for forex are worth checking against your own clock, because for a few weeks each spring and autumn the UK and the US change clocks on different dates. The false move inside this window is what ICT calls the Judas swing. Here is the bullish version, candle by candle.

  1. Price trades below the Asian low. Nothing to do yet. A break of the level is not a sweep until price fails to stay there.
  2. A candle closes back above the low. On the 15-minute or 1H chart, a candle wicks under the Asian low and closes inside the range. Stops were taken and price was not accepted lower. That is the liquidity sweep.
  3. Delivery changes. A strong up move closes above the open of the run of down candles that led into the low. That is a CISD, a change in state of delivery: price has stopped delivering lower and started delivering higher. Stricter traders wait for a market structure shift (MSS, also labelled CHoCH), a close above the most recent lower high. It comes later and costs some of the move.
  4. The move leaves a zone. A fair value gap (FVG) is the three-candle gap where the first candle's high and the third candle's low do not overlap. The order block is the last down-close candle before the displacement. Either is a place to wait for a retrace.
  5. Risk is defined by the sweep. The stop belongs below the sweep low, with room for cable's wicks. The first target is the Asian high, then the draw from step 1.

The bearish version mirrors it: bearish bias, a raid above the Asian high, a close back inside, a bearish CISD, a retrace into the gap, and a stop above the sweep high.

What invalidates it

  • A candle closes below the sweep low after the reversal. The low was not protected.
  • Price closes straight through the FVG against you. The gap has inverted and now works for the other side.
  • London closes beyond the Asian range and stays there. That was a breakout, and the difference is covered in liquidity sweep vs breakout.
  • Price never retraces. No retrace, no entry. Chasing the displacement candle puts the stop too far away to size sensibly.

Step 4: Read New York as continuation or reversal

The New York kill zone runs 07:00–10:00 New York time, and many major US releases are scheduled for 8:30 inside it. For GBP/USD this is the London–New York overlap, with both sides of the pair active. Which scenario you get depends on one question: has the higher-timeframe draw been reached?

  • Not reached: continuation. London set the low of the day and price is still below the target. New York can pull back into London's FVG or order block, or sweep a small intraday low, and then carry on. The same rules apply: sweep, close back, shift, retrace.
  • Reached: possible reversal. If London has already run the previous day's high, the day's job may be done. A New York raid above the London high that closes back below it, followed by a bearish CISD, is the reversal version. The London close window, 10:00–12:00 New York time, is where an intraday move can retrace as London traders close.

You cannot know in advance which one will print. What you can do is refuse a continuation entry when the target is already taken.

GBP/USD session checklist

Window (New York time)What to look forWhat cancels it
Before LondonDaily bias from the last closed daily candle, and the draw on liquidity it points toYesterday closed inside the prior day's range: no clean bias
Asia, 20:00–00:00Range high and low; equal highs or lows at the edgesAsia trends one way and leaves no balanced range
London, 02:00–05:00A raid on the side opposite the bias, a close back inside, then a CISD or MSS and a retrace into the FVG or order blockPrice closes beyond the range and holds, or closes back through the sweep extreme
New York, 07:00–10:00Continuation from London's zone if the draw is untouched; a reversal setup if it is already takenA close through London's FVG or order block against the move
London close, 10:00–12:00Retracement of the intraday move; a window for managing positionsNot a window for starting new continuation ideas

EUR/USD as a second opinion

GBP/USD and EUR/USD usually move in the same direction because both are quoted against the dollar. SMT divergence is the moment they disagree at a key level: GBP/USD takes its Asian low while EUR/USD holds above its own, or the reverse. That crack suggests the sterling move was a raid on stops, not broad dollar strength. The method is laid out in reading EUR/USD against GBP/USD for SMT divergence. Use it as supporting evidence for a sweep you already see, never as the trigger. Distrust it on days with UK-specific news, when the two pairs have a real reason to split.

Where this model fails on GBP/USD

  • Sweeps with the bias. If the bias is bullish and London takes the Asian high first, the textbook trap has not formed. Fading it means trading against your own read. Joining it means entering right where stops were just taken. Waiting for a pullback is the only clean option.
  • News days. UK inflation prints, Bank of England decisions and US jobs data can drive price through the Asian range, the sweep level and your stop in a single candle while spreads widen. Read about discipline around high-impact news before holding a London setup into a release.
  • Both sides swept. Some days London takes the Asian low, reverses, takes the Asian high and stalls. A day with no clean setup is a valid outcome.
  • Thin London sessions. On UK bank holidays the session that normally does the work is short of participants, and the range may not resolve until New York.
  • Stops sized for a different pair. A stop distance copied from EUR/USD ignores how cable behaves at levels. Put the stop where the idea is wrong and reduce position size to match.

The model also says nothing about how far the move runs once the first target is hit. That is a trade-management decision, and it is yours.

How to find GBP/USD setups on LiquidityScan

LiquidityScan is scanning software, not a broker or a signal service. It reports ICT patterns on closed candles and leaves the decision to you. Its Forex mode covers 72 instruments, GBP/USD is one of the seven majors, and all 15 scanners run on forex. Open the All Scanners page in Forex mode to see each scanner with its live count, then open one and look for GBP/USD among its live signals. Pages inside the app need a free account, which you can create here.

The steps above map onto these scanners:

  • Bias (step 1). It flags a bullish bias when a candle closes above the previous candle's high and a bearish one when it closes below the previous low. It is one of the eight classic scanners, free to read on 1H, 4H, 1D, 1W and 1M.
  • Asia Range Sweep (steps 2 and 3). It detects an Asian-range liquidity sweep plus reversal, aligned to a daily bias. It is one of the seven premium scanners: the Free plan shows its live count, Starter opens the setups to browse, and alerts on it belong to the Base plan.
  • CISD and CISD + IFVG (confirmation). Both are classic scanners. The second fires only when the CISD also reclaims an inverse fair value gap.
  • Fair Value Gaps and Order Blocks (entry zones). Both are premium scanners.

Two limits to know. Most scanners work on 1H, 4H and 1D. Only Fair Value Gaps and CISD+ also have 5m and 15m, and those two timeframes belong to the Base plan and above. So the 15-minute sweep read in step 3 is still done on your own chart, with the scanners supplying the context from 1H upward. Second, the KZ tag on 1H and 4H signals marks candles that opened between 12:00 and 16:00 UTC, which is the New York morning side of the day, not the London open. It helps with step 4, not step 3.

If GBP/USD is a pair you follow daily, star it on any scanner page and the Watchlist collects its signals in one place.

Frequently Asked Questions

What is the best time to trade GBP/USD with ICT concepts?

The London kill zone, 02:00–05:00 New York time, is where the model looks for the raid on the Asian range. The New York kill zone, 07:00–10:00 New York time, is the second window, for continuation or reversal. The pair still moves outside those windows, but the session model has less to anchor to.

Does London always sweep the Asian range on GBP/USD?

No. Some days London breaks out and never looks back, some days it takes both sides, and some days price stays inside the range until New York. The sweep is a setup to wait for, not an event that arrives on schedule, and we will not put a number on how often it happens.

Which timeframes should I use for GBP/USD?

The daily chart for bias and the draw on liquidity, the 4H and 1H for key levels and context, and the 15-minute or 5-minute chart for the sweep, the shift and the entry zone. A lower timeframe gives a tighter stop but also more false shifts, so many traders confirm on the 15-minute before refining lower.

Is GBP/USD harder to trade than EUR/USD?

The model is the same on both. Cable tends to be less tidy at levels, so it asks for wider stops and smaller size for the same account risk. Some traders learn the sequence on EUR/USD first and then adapt their stop placement to sterling.

Where does the stop go on a London sweep entry?

Beyond the extreme of the sweep, with some room, because that is the level that proves the idea wrong. If that distance makes the target too close to be worth the risk, the answer is to skip the trade, not to tighten the stop into the liquidity.

Can LiquidityScan alert me when GBP/USD sweeps its Asian range?

Asia Range Sweep is a premium scanner, and alerts on the premium scanners belong to the Base plan. In My Alerts you choose the scanner, the market and the timeframe, and delivery is by browser push, Android push or the in-app bell. There is no Telegram delivery.

Hayk Muradian

Hayk Muradian

Founder & Lead Analyst at LiquidityScan · 12+ years ICT/SMC trading · Institutional order flow specialist

Hayk Muradian is the founder of LiquidityScan, a professional trading intelligence platform built for ICT (Inner Circle Trader) and Smart Money Concepts (SMC) traders. With over a decade of hands-on experience reading institutional order flow across crypto, forex, and futures markets, Hayk specializes in identifying liquidity events, order blocks, and CISD setups on closed candles.

He built LiquidityScan after years of frustration with retail charting tools that ignored the mechanics institutions actually use. The platform now scans 400+ markets in real-time, surfacing the same patterns floor traders watch — without the noise.

Hayk writes about the methodology behind ICT and SMC, with a focus on practical, data-driven analysis rather than hype. He is a vocal critic of "smart money" content that misrepresents institutional intent and a strong advocate for methodology-respectful education.

View all 386 articles by Hayk Muradian →

Not trading advice. LiquidityScan publishes educational content for informational purposes only. Trading involves substantial risk of loss.